中文 | English    
锁相放大器
前置放大器
光学斩波器
电子学插件
信号发生器
频率分析仪
功率放大器
精密滤波器
LCR测试仪
交流电压表
协议分析仪
计测系统
TOF-MS
膜厚测量仪
信号平均器
其他
资料下载
首页 | 产品展示 | TOF-MS | 前置放大器 | 前置放大器
厂商名称:Signal Recovery
商品名称:前置放大器
商品型号:9326-P
简单信息:在飞行时间质谱领域,从MALDI-TOF、QqTOF到LC/TOF-MS以及GC/TOF-MS,Signal Recovery能提供高质量的数据采集产品。

Models 9326-P and 9326-A-P
Fast Preamplifiers

INPUT NOISE <100 uV rms.
OUTPUT RISE TIME <1 ns.
LOW FREQUENCY ROLL-OFF <10 kHz.
GAIN Selectable by board jumpers for 5, 10, or20 V/V. The overall gain is non-inverting.
OPERABLE TEMPERATURE RANGE 0–50°C.

COARSE GAIN Board jumper selection of low(5 V/V), medium (10 V/V), or high (20 V/V) gain.

ANALOG INPUT Front-panel BNC connectoraccepts negative-polarity analog signals in the range of 0 to -200 mV. Input impedance: 50 W ac,<1000 W dc to ground. Diode clamps provide protection against overload to ±2 V dc, or ±10 V for a 50-ns wide pulse at a duty cycle <1%.

ANALOG OUTPUT Rear-panel BNC connector provides a negative-polarity output pulse. Linear range is nominally +0.25 V to -1 V on a 50-W load.AC-coupled and short-circuit protected.

POWER Requires +12 V at 100 mA dc power,which is supplied through a 3-m (9.8-ft) power cord included with the Model 9326. The mating connectors on the ends of the power cord are ORTEC-standard, 9-pin-D, preamplifier power connectors. Pin assignments for the male connector on the preamplifier case are +12 V on pin 4, and ground on pins 1 and 2.
WEIGHT Net 0.39 kg (0.85 lb); shipping 1.3 kg(2.9 lb).
DIMENSIONS Compact preamplifier box: 8.6 cm W × 13.3 cm D × 3.0 cm H (3.4 in. W × 5.3 in. D ×1.2 in. H).

| 联系方式:010-65202180 传真:010-65202182 北京三尼阳光科技发展有限公司 .版权所有 | 技术支持:尚品中国